Procedure of juice filling machine :

1. The raw water will be purified and sterilized after passing through the water treatment system, and will be stored in the purified water storage tank;

2. The juice will be prepared by the juice preparation system, the prepared juice is stored in the insulation tank (for heat preservation) temporarily;

3. Automatic heat resistance PET bottle blow molding machine is connected with the water filling machine by the Air conveyor;

4. Prepared juice will be pumped into the juice filling machine; At the same time, empty bottles pass through the rinsing, filling and capping 3-in-1 monoblock, the bottles will be rinsed, filled and capped.

5. Bottled water goes out from the water filling machine and will be transferred to the bottle over-turn sterilizing machine, the cap and the bottle mouth will be sterilized after passing through the sterilizing machine, then the bottles will be transferred to the bottle cooling machine;

6. The bottles are getting dried after passing through the blowing dryer, and the dried bottle will go to the labeling machine and PE film shrink wrapping machine;

7. The packed bottle water will come out from the PE film shrink wrapping machine.